Jiangsu Sheye Metal Co.,Ltd
Call us on:+86-519-89885505   E-mail: sales@syemetal.com
Knowledge
Home > Knowledge > Content

Seamless steel pipe can withstand pressure, pressure formula

Jiangsu Sheye Metal Co.,Ltd | Updated: Sep 02, 2016
Source:

Seamless steel tube under external pressure and internal force, fear of burst pipes as you say, is not referring to the force? Seamless pipe used most of force in the design of the boiler, pipes can withstand the pressure and pipe diameter, wall thickness, temperature, use the relationship to the environment.

Can tell you a formula that is inside the boiler design of pipe wall thickness calculation formula can be under pressure on the back of wall thickness: PD/(2Ya+p).

Where p is the pressure, d is the diameter, and y is the attenuation coefficient, take 1, a is the stress this to choose a corresponding material shall be according to the temperature stress.

Specific reference to boiler strength calculation standards: 16507, 16508. tubes of small diameter, wall thickness 3 mm, for 3, 4 MPa above is no problem.

Tensile strength σ of the set material, pressure p, outer diameter d; pipes wall thickness δ = (P*D)/(2*/σ s) where s is the safety factor; p less than 7MPa,S select S=8; p less than 17.5MPa,S select S=6; p greater than 17.5MPa,S select S=4; we made safety S=6; -20 tensile strength of 410MPa steel, it tube can withstand a pressure of p = (2* σ/S* δ)/D = (2*410/6*3)/(10+6) =26.25MPa> set 17.5 safety factor of S=4 can withstand the pressure of the pipe P= (2* σ/S* δ)/D = (2*410/4*3)/(10+6) =39.375MPa


Product Categories

Fast Track

  • Feedback
    Jiangsu Sheye Metal Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: #2201, Block B, WTC (World Trade Center), Wujin District, Changzhou
    Tel: +86-519-89885505    
    Fax: +86-519-81188671    
    E-mail: sales@syemetal.com
Copyright © Jiangsu Sheye Metal Co.,Ltd