Jiangsu Sheye Metal Co.,Ltd
Call us on:+86-519-89885505   E-mail: sales@syemetal.com
Products

Stainless Steel Elbow

Stainless steel elbow is usually installed between two lengths of stainless steel pipe(or tubing) to allow a change of direction, usually a 180º, 90º, or 45º angle. 22.5ºstainless steel elbows are also available.

Chat Now
Parameter

Stainless steel elbow is usually installed between two lengths of stainless steel pipe(or tubing) to allow a change of direction, usually a 180º, 90º, or 45º angle. 22.5º elbows are also available.

The end of this product may be machined for butt welding, threaded (usually female) or socket. When the ends differ in size, it is known as a reducing (or a reducer) elbow.

These elbows are categorized by design. The radius of a long-radius (LR) elbow is 1.5 times the pipe diameter. In a short-radius (SR) elbow, the radius equals the pipe diameter. Ninety-, 60- and 45-degree elbows are also available.

Most of them are available in short- or long-radius versions. Short SS elbow, widely available, are typically used in pressurized systems. Long SS elbows are used in low-pressure gravity-fed systems.

Jiangsu Sheye Metal is a professional manufacturer specialized in manufacturing stainless steel elbow. According to different production process, it can be divided into two types: seamless and welded stainless steel elbow.

There are main four types elbows like: 45º Elbow, 90º SR Elbow(Short Radius), 90º LR Elbow(Length Radius), 180º Elbow.

The outside diameter of these elbows we produce ranges from 4.0 mm to 1219mm. The wall thickness is 0.5mm to 40mm. For metal, we are serious.

45º Stainless Steel Elbow

Size

OD: seamless DN15-DN600; Welded DN15-DN1200;  WT:SCH5S-SCH160;

Process

Mandrel forming

Surface

Aid Pickling, Polishing, Shot Blasted, Rolling Sand

 

90º LR Stainless Steel Elbow(Length Radius)

Size

OD: seamless DN15-DN600; Welded DN15-DN1200;  WT:SCH5S-SCH160;

Process

Mandrel forming

Surface

Aid Pickling, Polishing, Shot Blasted, Rolling Sand

Note: Long radius elbow refers to its radius of curvature is equal to 1.5 times the diameter of the pipe, R=1.5D

90º SR Stainless Steel Elbow(Short Radius)

Size

OD: seamless DN15-DN600; Welded DN15-DN1200;  WT:SCH5S-SCH160;

Process

Mandrel forming

Surface

Aid Pickling, Polishing, Shot Blasted, Rolling Sand

Note: Short radius elbow refers to its radius of curvature is equal to 1 times the diameter of the pipe, R=1D

180º Stainless Steel Elbow

Size

OD: seamless DN15-DN300; Welded DN15-DN300;  WT:SCH5S-SCH160;

Process

Ball forming/Hot forming

Surface

Aid Pickling, Polishing, Shot Blasted, Rolling Sand

Main Grades of Stainless Steel Seamless Pipe

Austenitic/Super Austenitic Stainless Steel Seamless Pipe

304,  304H,  304L,  304LN,  321,  321H,  316,  316L,  316LN,  316Ti,  317L,  310S,  310H,  314,  347H,  904L,  S31254, N08367, N08926,  S32654,  S31277

Ferrite/Super Ferrite Stainless Steel Seamless Pipe

405,  430,  439,  444,  TP446-1/TP446-2,  S44660,  S44735,  S44736

Duplex/Super Duplex Stainless Steel Seamless Pipe

S31500,  S31803,  S32205,  S32304,  S32520, S32550,  S32750,  S32760

Martensite/Super Martensite Stainless Steel Seamless Pipe  

410S,  410,  420,  420J2,  431,  17-4PH,  13Cr110,  17Cr110/125

Nickel Alloy Seamless Pipe

N04400, N05500, N06600, N06601, N06025, N06617, N06625, N06690, N08810, N10276, N06022, N10665, N10675, N08020, N08028, N08031, N06985, N06030, N06035, N07750

Production Standard

GB

GB/T 12459,  GB/T 13401,  GB/T 14975

ASTM

ASTM B16.9

SH

SH 3408, SH3409

HG

HG/T 21635, HG/T 21631

SY

SY/T 05010

Tolerance in butt-welding fittings(ASTM/AISI B16.9、B16.28)


Specifications

 

Types

Nominal diameter

1/2-21/2

3-31/2

4

5-8

10-18

20-24

26-30

32-48

Outside Diameter

All Pipe Fittings

 

+1.52

±1.52

+2.29

+4.06

+6.35

-0.76

-

-1.52

-3.05

-4.83

Inside Diameter

All Pipe Fittings

±0.76

-

±3.05

±4.83

Wall Thickness

All Pipe Fittings

≥0.875*WT

Center to End

45º/90º Elbows

±1.52

±2.29

±3.05

+4.83

Center to center

180° Elbows

±6.35

±9.65

-

Back to face

180° Elbows

±6.35

-

U

180° Elbows

±0.76

±1.52

-

Packing Information
Stainless steel elbows are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or international transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.
A. Sheye Metal Export Standard Seaworthy Packing for Stainless Steel Elbows.
Wooden Pallet, Plywood Case, Wooden Boxes.
B. Customization

Related Products

Product Categories

Fast Track

  • Feedback
    Jiangsu Sheye Metal Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: #2201, Block B, WTC (World Trade Center), Wujin District, Changzhou
    Tel: +86-519-89885505    
    Fax: +86-519-81188671    
    E-mail: sales@syemetal.com
Copyright © Jiangsu Sheye Metal Co.,Ltd